Leiden Cryogenics provides extra options for our Dilution Refrigerators
Leiden Cryogenics provides extra options for our Dilution Refrigerators

· Cold insertable probe

· The cold insertable probe is loaded in to the dilution refrigerator fully automatically. The arms of the probe are pushed against the plates of the DR unit using a pneumatic actuator. An edge welded bellow is used as load-lock, thus avoiding possibly leaky sliding seals.  The probe shown on the LEFT has a single spindle and 4 guiding rods. The · larger 110 mm probe has 2 spindles and 2



  • Product parameters
  • Scope of application
  • Product description
  • Parameter configuration

Cold insertable probe

The cold insertable probe is loaded in to the dilution refrigerator fully automatically. The arms of the probe are pushed against the plates of the DR unit using a pneumatic actuator. An edge welded bellow is used as load-lock, thus avoiding possibly leaky sliding seals.  The probe shown on the LEFT has a single spindle and 4 guiding rods. The larger 110 mm probe has 2 spindles and 2



(Products information might be changed, for details pls contact with us)


Cold insertable probe

The cold insertable probe is loaded in to the dilution refrigerator fully automatically. The arms of the probe are pushed against the plates of the DR unit using a pneumatic actuator. An edge welded bellow is used as load-lock, thus avoiding possibly leaky sliding seals.  The probe shown on the LEFT has a single spindle and 4 guiding rods. The larger 110 mm probe has 2 spindles and 2



(Products information is in changing, for details pls contact with us)


Cold insertable probe

The cold insertable probe is loaded in to the dilution refrigerator fully automatically. The arms of the probe are pushed against the plates of the DR unit using a pneumatic actuator. An edge welded bellow is used as load-lock, thus avoiding possibly leaky sliding seals.  The probe shown on the LEFT has a single spindle and 4 guiding rods. The larger 110 mm probe has 2 spindles and 2


(Products information is in changing, for details pls contact with us)


Cold insertable probe

The cold insertable probe is loaded in to the dilution refrigerator fully automatically. The arms of the probe are pushed against the plates of the DR unit using a pneumatic actuator. An edge welded bellow is used as load-lock, thus avoiding possibly leaky sliding seals.  The probe shown on the LEFT has a single spindle and 4 guiding rods. The larger 110 mm probe has 2 spindles and 2



(Products information is in changing, for details pls contact with us)

Previous:超低噪声放大器Next:No Data
Recommend