CF-CS110-Use exchange gas
CF-CS110-Use exchange gas

· Technical specifications of our latest line of cryogen-free models – the CF-CS110 series

· 2 Pulse Tube coolers => Room temperature to base temperature ~ 24 hours with liquid nitrogen pre-cooling

· DR unit with 490mm diameter mixing chamber plate => Possibility of multiple simultaneous experiments

· Optional top-loading cold-insertable probes (see later) for quick sample change (110mm or 50mm sample space) -> 8 hours from room temperature to base temperature. · Warm-insertable semi-probes also available

· Up to four 110mm and two 50mm clear shot tubes possible down to the 3K plate (one 110mm and one 50mm being standard) => Multiple parallel experimental probes possible

· Possibility of inserting the probe into a magnet attached to the Still shield (up to 10T) or the 3K shield (up to 14 Tesla). Vector magnets (either YZ or XYZ) are also available

· Pt and/or RuO resistance thermometers on all stages. Calibrated resistance thermometer on the mixing chamber plate.  Optional CMN mutual inductance and/or SQUID noise thermometers also available

· Automatic lifting table for easy mounting of the shields

· Robust design => High stability and low vibration amplitudes


（Technical Data and configuration might be changed. For detailed information, pls contact with us.


  • Product parameters
  • Scope of application
  • Product description
  • Parameter configuration

CF-CS110


Technical Data might be changed, for detailed information, pls contact with us.

Technical specifications of our latest line of cryogen-free models – the CF-CS110 series

2 Pulse Tube coolers => Room temperature to base temperature ~ 24 hours with liquid nitrogen pre-cooling

DR unit with 490mm diameter mixing chamber plate => Possibility of multiple simultaneous experiments

Optional top-loading cold-insertable probes (see later) for quick sample change (110mm or 50mm sample space) -> 8 hours from room temperature to base temperature. Warm-insertable semi-probes also available

Up to four 110mm and two 50mm clear shot tubes possible down to the 3K plate (one 110mm and one 50mm being standard) => Multiple parallel experimental probes possible

Possibility of inserting the probe into a magnet attached to the Still shield (up to 10T) or the 3K shield (up to 14 Tesla). Vector magnets (either YZ or XYZ) are also available

Pt and/or RuO resistance thermometers on all stages. Calibrated resistance thermometer on the mixing chamber plate.  Optional CMN mutual inductance and/or SQUID noise thermometers also available

Automatic lifting table for easy mounting of the shields

Robust design => High stability and low vibration amplitudes


（Technical Data and configuration might be changed,  For detailed information, pls contact with us.


Technical specifications of our latest line of cryogen-free models – the CF-CS110 series

2 Pulse Tube coolers => Room temperature to base temperature ~ 24 hours with liquid nitrogen pre-cooling

DR unit with 490mm diameter mixing chamber plate => Possibility of multiple simultaneous experiments

Optional top-loading cold-insertable probes (see later) for quick sample change (110mm or 50mm sample space) -> 8 hours from room temperature to base temperature. Warm-insertable semi-probes also available

Up to four 110mm and two 50mm clear shot tubes possible down to the 3K plate (one 110mm and one 50mm being standard) => Multiple parallel experimental probes possible

Possibility of inserting the probe into a magnet attached to the Still shield (up to 10T) or the 3K shield (up to 14 Tesla). Vector magnets (either YZ or XYZ) are also available

Pt and/or RuO resistance thermometers on all stages. Calibrated resistance thermometer on the mixing chamber plate.  Optional CMN mutual inductance and/or SQUID noise thermometers also available

Automatic lifting table for easy mounting of the shields

Robust design => High stability and low vibration amplitudes


（Technical Data and configuration might be changed, Exact technical data  can be given by our written   quotation based on customer's inquiry )


Technical specifications of our latest line of cryogen-free models – the CF-CS110 series

2 Pulse Tube coolers => Room temperature to base temperature ~ 24 hours with liquid nitrogen pre-cooling

DR unit with 490mm diameter mixing chamber plate => Possibility of multiple simultaneous experiments

Optional top-loading cold-insertable probes (see later) for quick sample change (110mm or 50mm sample space) -> 8 hours from room temperature to base temperature. Warm-insertable semi-probes also available

Up to four 110mm and two 50mm clear shot tubes possible down to the 3K plate (one 110mm and one 50mm being standard) => Multiple parallel experimental probes possible

Possibility of inserting the probe into a magnet attached to the Still shield (up to 10T) or the 3K shield (up to 14 Tesla). Vector magnets (either YZ or XYZ) are also available

Pt and/or RuO resistance thermometers on all stages. Calibrated resistance thermometer on the mixing chamber plate.  Optional CMN mutual inductance and/or SQUID noise thermometers also available

Automatic lifting table for easy mounting of the shields

Robust design => High stability and low vibration amplitudes


（Technical Data and configuration might be changed, for detailed information pls contact with us)


Previous:No DataNext:CF-CS110-No exchange gas
Recommend